Thank you for purchasing and using our products.
We would like to announce that a new firmware update for the SIGMA fp is now available.

[Applicable product]
SIGMA fp

[Benefits of the update]
(Ver2.01)

-Corrected the phenomenon of displaying white corners on DNGs or CinemaDNGs in some development software when using the following combination;
SIGMA fp and Panasonic’s LUMIX S 20-60mm F3.5-5.6 with the Lens Optics Correction function Vignetting setting set to ‘auto’, when the focal length is 20mm and aperture value of F3.5.

-Corrected the bug related to Blackmagic RAW codec recording over HDMI with Blackmagic Video Assist 12G model manufactured by Blackmagic Design.*1

– Corrected the bug related to Compressed RAW over HDMI recording with Atomos Ninja V monitor-recorder.*2

*1 Requires firmware update of Video Assist 12G models using Video Assist Update.
*2 A free ATOMOS firmware update for Ninja V is required.

To update the firmware, please refer to the following link;
https://www.sigma-global.com/en/download/cameras/firmware/#fp

* To develop raw data (DNG files) from the SIGMA fp with firmware Ver. 2.00 or later, the use of SIGMA Photo Pro 6.7.4 is required. Users need to update to SIGMA Photo Pro 6.7.4 when applying the fp ver.2.01 firmware update.

【SIGMA Photo Pro download page】
https://www.sigma-global.com/en/download/cameras/sigma-photo-pro/

[Contact]
For further information, please contact your local authorized SIGMA Service Station listed in the link below:
https://www.sigma-global.com/en/about/world-network/